ADC Soneplex P-61-743 Dokumentacja Pobierz pdf (Strona 31)

- 30 -

(6) Test run

Operate by the controller buttons and the switches to check the operation method and the

position.

Operation method is as follows.

1) Set the position switch

○

h to the position number you

desire.

2) Confirm that the position number flashes on the

7-segment LED

○

3) Press and hold the set button

○

g . Operation is kept while

the button is pressed. 7-segment LED

○

f flashes

slowly during operation. Slow flashing changes to being

solid when the set position is reached. This operation

confirms the stop position and the operation method.

4) Confirm other stop position with the same operation.

* For Pushing operation, check with the test function of manual

mode or auto mode. Refer to 7.4 Test function (P.

38) for

details of normal operation and test function.

(7) Setting of Speed and Acceleration

Set the speed and the acceleration by switch

○

k to

○

n per direction of actuation. The switch

can be set in 16 steps. Actual value depends on the actuator. Refer to 10. Initial s

etting value

per actuator (P.

48). Operation procedure is the same as (6) Test run.

(8) Completion of setting

After the setting, the operation can be controlled by switching to auto mode by the mode switch

○

e . Refer to 9. Operation (Example) (P.44) for operation of PLC.

Caution

Close the cover

○

c after the switching of the mode to avoid unexpected mode change.

○

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 78 79

Komentarze do niniejszej Instrukcji

Brak uwag

ADC Soneplex P-61-743 Dokumentacja Strona 31

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking ADC Soneplex P-61-743