Adc SG-1 Instrukcja Użytkownika Pobierz pdf (Strona 70)

Chapter 6: First-Level Commands June 30, 2006

6-34 SG1-UM-8500-03

USING DEBUG MODE

This section provides information on the commands and options available in debug mode.

Switching to Debug Mode

Use the debug command at the first-level prompt (Host>) to switch the system to the second-level debug prompt:

Host(debug)#. This prompt indicates that the user is now in the second-level debug mode and has access to the

five second-level commands in the debug menu.

Usage

Parameter(s)

None.

Example(s)

Host> debug

Step Action

1Use the show command to display memory, system and fragmentation information.

2The port sonet source-clock command determines timing configuration for the ATM port specified.

3 At this level, the exit and end commands will return the user to the first configuration level.

4 From the Host> prompt, enter the debug command in the following format:

debug

Host(debug)# ?

show - Display debug parameters

port - Select a port to configure

port-ethernet - Port ethernet interface

radius-server - radius server command

clear - Clear arp table

exit - Exit current level

end - Return to first level

Host(debug)#

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 225 226

Brak uwag

Adc SG-1 Instrukcja Użytkownika Strona 70