ADC MM701G Instrukcja Użytkownika Pobierz pdf (Strona 16)

Assign IP Addresses

8 MM701G and MM702G User Manual

Use the following steps to set up a management PC to be on the same subnet with the modem.

(The example shows instructions for a PC that is running Microsoft Windows 98 SE;

instructions for other operating systems may differ slightly.)

1 From the Windows desktop, click

Start, Settings, Control Panel to open the

Control Panel dialog.

2 From the

Control Panel dialog, double-click the Network icon (shown to the

right). The

Network dialog is displayed.

3 From the

Configuration tab, double-click TCP/IP to display the TCP/IP Properties dialog.

4 The modem can be set up to serve IP addresses to devices on the LAN (DHCP server

feature). Do one of the following:

• If DHCP server has not been enabled on the modem (default setting), select

Specify an

IP address

• If DHCP server has been enabled on the modem, select

Obtain an IP address

automatically

and go to Step 6.

5 Enter an

IP Address and Subnet Mask that places the management PC on the same subnet as

the modem.

Use an IP address in the range of 10.0.0.2 to 10.0.0.254.

6 Click

OK to close the TCP/IP Properties dialog.

7 Click

OK to close the Network dialog.

8 Click

OK to restart the computer.

TCP/IP Network Configuration

for an Ethernet NIC

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 167 168

Brak uwag

ADC MM701G Instrukcja Użytkownika Strona 16